3, 6 & 18-Pack
Light, right where you need it.
BUTTON LAMP™ adhesive LEDs put 20 lumens in closets, cabinets, toolboxes, and emergency kits. Each lamp is about the size of a quarter, waterproof and shockproof, and rated for 17+ hours of light. Batteries are included.
Peel, stick, and flip the switch.
Key benefits
A stick-on lamp that fits in tight spaces.
Cordless, peel-and-stick lighting for indoors and outdoors. No outlets. No bulky lantern.
20 lumens
Targeted light from each BUTTON LAMP.
17+ hours
Of light, with the battery preinstalled.
Size of a quarter
1" wide × 1" long × 0.25" thick.
Peel-and-stick
Adheres to metal, wood, drywall, and plastic.
Waterproof & shockproof
Built for indoor and outdoor use.
Simple on/off switch
Not motion-activated. Flip it when you need light.
Take it anywhere
Closets, kits, campsites, and tight workspaces.
Stick one in a dark corner, a toolbox lid, a cabinet, or an emergency kit. Keep a pack in the house, the car, the boat, or the camper.
Closets and shelves
See into dark corners without a flashlight in your hand.
Kitchens and cabinets
A small lamp for counters, cupboards, and other tight spots at home.
Toolboxes and jobsites
Hands-free light in a shed, garage, or toolbox, with no cord to trip over.
Vehicles and emergencies
Under a hood, in a trunk, or ready in a kit when the power goes out.
Built tough
Waterproof and shockproof.
The housing is rigid, waterproof, and shockproof, so you can use a BUTTON LAMP indoors or outdoors. The official packaging marks them for indoor and outdoor use.
How to use
Peel, stick, and switch it on.
Each lamp arrives with its battery preinstalled. Peel the adhesive backing and press the lamp onto metal, wood, drywall, plastic, or a similar surface. The switch is on the front of the lamp: turn it to the right for light, and to the left to turn it off. BUTTON LAMPS are not motion-activated.
To remove a lamp, pry gently underneath it with a coin or a small flathead screwdriver. If a little residue remains, a finger or a small drop of cleaning solution will usually take it off.
3 packs
Choose your pack size.
Same BUTTON LAMP in every pack. Batteries are included and preinstalled.
3-Pack
6-Pack
18-Pack
Specs
Specifications
Light output
20 lumens (each lamp)
Battery life
17+ hours (approximately 17 hours)
Battery
Preinstalled coin-cell battery; not replaceable. When the battery is spent, replace the lamp.
Power
Manual on/off switch on the front of the lamp. Not motion-activated.
Size (each)
1" W × 1" L × 0.25" thick, about the size of a quarter
Housing
Rigid. Waterproof and shockproof. Will not bend.
Mounting
Peel-and-stick adhesive. Sticks to metal, wood, drywall, plastic, and similar surfaces.
Use
Indoor and outdoor. Cordless.
Pack sizes
3-Pack, 6-Pack, and 18-Pack
6-Pack shipping weight
2.39 oz, including packaging
Model
BUTTON LAMP™ adhesive LED utility light
What's Included
3-Pack: 3× BUTTON LAMP adhesive LEDs, batteries included
6-Pack: 6× BUTTON LAMP adhesive LEDs, batteries included
18-Pack: 18× BUTTON LAMP adhesive LEDs, batteries included
Batteries are preinstalled and not replaceable. When the battery is spent, replace the lamp. These are not USB-rechargeable lights.
FAQ
Questions, answered.
How bright is a BUTTON LAMP?Each lamp puts out 20 lumens of targeted light, enough for closets, cabinets, toolboxes, and other tight spaces.
How long does the battery last?Each lamp is rated for 17+ hours of light, or about 17 hours. Batteries come preinstalled.
Can I replace the batteries?No. The battery is preinstalled and is not replaceable. When the battery is spent, replace the lamp. These are not USB-rechargeable lights.
How do I turn it on?Use the switch on the front of the lamp. Turn it to the right for light, and to the left to turn it off. BUTTON LAMPS are not motion-activated.
Is it waterproof?Yes. BUTTON LAMPS are waterproof and shockproof, and they are designed for indoor and outdoor use.
How big is it?Each lamp is 1" wide, 1" long, and 0.25" thick, about the size of a quarter. The housing is rigid and will not bend. A 6-pack ships at 2.39 oz, including packaging.
What surfaces will it stick to?The peel-and-stick adhesive is made for metal, wood, drywall, plastic, and similar surfaces.
How do I remove it?Pry gently underneath the lamp with a coin or a small flathead screwdriver. If a little residue remains, use your finger or a small drop of cleaning solution.
What pack sizes are available?BUTTON LAMPS come in a 3-Pack, a 6-Pack, and an 18-Pack. Every pack includes the lamps with batteries preinstalled.
What is your guarantee?BUTTON LAMPS are backed by Panther Vision's limited lifetime warranty for defects in materials or workmanship. The warranty does not cover normal battery life. Replacement coin-cell battery packs sold separately are also not covered. See our guarantee for details.
Guarantee
Limited lifetime warranty.
If a BUTTON LAMP fails because of a defect in materials or workmanship, Panther Vision will replace it. This warranty does not cover normal battery life, and it does not cover replacement coin-cell battery packs sold separately. Read the full guarantee.
Read more less